CIMS論文的天地

 

The critical speeds and radii for converage in sensor networks

注意:本論文已在《Lecture Notes in Control and Information Sciences Volume 344/2006 / Intelligent Control and Automation 》:106-117發表
使用者請注明論文出處
ZANG Chuan-zhi1,2  LIANG Wei1  YU Hai-bin1
(1.Shenyang Institute Automation,Chinese Academy of Sciences,Shenyang 110016;
2.Graduate School of the Chinese Academy of Sciences,Beijing 100049,China) 

Abstract: In sensor network the coverage problem is very important to topology control, energy saving, routing and et al. Compared to the well known sensor model and exposure model, a modified sensor model and a modified exposure model are used to analyze the critical parameters for coverage. The modified sensor model can deal with more general conditions, and the modified exposure model is more reasonable than the known ones. Based on these models, the sensor physical characteristics and the target properties, we analyze the coverage problem mathematically and identify two critical speeds and two critical radii of influence of the sensor node. Using these results, it is easy to estimate the critical sensor density or the critical number of sensor nodes required to cover a given area.
Keywords: sensor network - coverage - exposure

1瀏覽PDF格式全文需要使用軟件--Abode Acrobat(由于軟件較大并常見,我站不提供下載)

2、下載論文全文請點擊鼠標右鍵“另存為”或使用斷點續傳軟件下載(511KB)


本站收錄的本文作者的其他論文:

1、基于多智能體理論實現無線傳感器網絡的目標監視與追蹤的策略

2、無線傳感器網絡中基于移動智能體的目標追蹤

3、無線傳感器網絡覆蓋問題中的目標最優運動模式

4、Target Tracking based on the Dynamic Cluster Method in the Acoustic Sensor Network

5、無線傳感器網絡動態協同任務分配機制

6、The Probabilistic Analysis of Distance Estimators in Wireless Sensor Network

更多相關論文請點擊本站的<<<站內全文搜索>>>查找

 

歡迎您參加討論,發表您對此論文及其研究領域的看法!
(請在發言時在標題中使用所點評的論文的題目或研究方向,這樣方便大家瀏覽!)

返回首頁 | CIMS論文 | 并行工程 | 虛擬制造 | 敏捷制造 | 其他論文 | 項目開發 | 學術資源 | 站內全文搜索 | 免費論文網站大全 |

line.gif (4535 字節)

為了更好的為大家服務,歡迎您參加本站的投票調查

>>>>參加更多投票調查請點擊!

本站永久域名:http://www.ucytct.live歡迎訪問

注意:本站內容未經書面允許不得轉載

All rights reserved, all contents copyright 2000-2019
本站自2000年3月總網頁訪問量為
湖南快乐十分开奖情況